Hi, Today i decided to install ESXi 7.0 Update 3. You can find ESXi iso from here. and You can learn more about ESXi from here.

Verify that your system meets the minimum hardware requirements. See ESXi Requirements

1- Insert iso in to the disk drive and turn server on.

2- I choose ESXi-7.0U3

3- If you want Cancel your installation press Esc or continue press Enter

4- Press F11 for Accept End User License Agreement and Continue

5- Select a Disk to Install ESXi, Then press Enter

6- Select your keyboar layout and then press Enter

7- Enter your root password and then press Enter

8- If you sure about your config, press F11

9- Your installation complete, press Enter for reboot the server

10-  After reboot you can see DCUI

11- You can press F2 for login to DCUI, Please enter your root account and your root password

12- In this page you can configure new password, Management Network, enbale or disbale shell or ssh and other configs.

• 

13- I configure IP address for my ESXi server, I choose Configure Management Network and press Enter, Then I choose IPv4 Configuration, You can set IP address manual or use dynamic IPv4 address.

14- If you want to konw your Ip address is correct, You use Test Management Network .

Finish 🙂